Well, I feel stupid. After days of figuring out why I was getting an ugly feedback squeal coming everytime I tried to plug in my TenTec 1056 into something. Finally, today, on a total lark, I swapped out the cable. And... voila. Worked perfectly. So, here's some Morse code recorded directly from my radio (recorded using GarageBand):
Addendum: You could read the morse directly from
this spectrogram that I made of the resulting audio this improved spectrogram that I made of the resulting audio. You can see the obvious strong signal at the bottom, but at least three or four other signals scattered up in frequency from there.
Technorati Tags: Amateur Radio
Addendum: the two loudest signals in the above translate to:
= SEE U R IN MN EARL BUT NOT SURE WHERE BIGFORK IS LOCATED = I LIVED IN MN
MANY YEARS AGO
BUT I GUESS WHEN WE GET MORE IN TO WINTER THINGS GO BTR AT LEAST NOT SO MUCH QRM = HR ON 40 ES 80 SU