Daily Archives: 11/17/2011

A Low Power 477Thz beacon

I mentioned that Roger, G3XBM was shifting from the very low frequencies to much higher frequencies. His interest has already uncovered some links that I hadn’t seen before. One very cool thing was his discovery of a local 477Thz beacon (that’s red light) that is aimed roughly in his direction at a distance of around 30km. The beacon is the work of GB3CAM, and uses ten 10mm red LEDs, running with about 400mw DC power input. What a cool idea! The entire circuit consists of a PIC processor and an XR2206 monolithic function generator.

Check it out!

It appears that the UKNanowaves group on Yahoo! is a pretty lively group. I’ll be watching this closely.

Arduino PPT Solar Charger

A conversation I had recently got me on the topic of solar energy, and introduced me to something I hadn’t heard of before: maximum power point tracking. The basic idea is solar cells exhibit a complex non-linear relationship between illumination, temperature and resistance. This is usually represented by an curve that (for a given temperature and level of illumination) shows the relationship between current and voltage. Let’s swipe the diagram from wikipedia:

To maximize the transferred power, we want to maximize the power of the solar cell. This means operating the DC/DC converter at the particular point along the I-V curve where the area under the rectangle is maximized. Tim Nolan has designed a pretty cool circuit that when combined with an Arduino can do precisely that:

timnolan – Arduino PPT Solar Charger.

The details of the design are a bit beyond me at the moment (I’ve studied it for about 20 minutes) but the basic idea is to sample the voltage (via a voltage divider) and the current (derived from the voltage drop across a very small current sense resistor, amplified by an op amp), and then use the PWM capabilities of the Arduino to serve as a switching dc/dc converter. Very neat little circuit. I’ll study it more in the future.